|
Heavy duty 6 ounce fiberglass that lets light come in and keeps the weather out.
Part 1 General
1.01 Work Included - Sectional overhead doors shall be as supplied by GADCO and as shown on plans.
1.02 Related Work - Opening preparation, miscellaneous or structural metal work, access panels, field painting, field electrical wiring, etc. are in the Scope of Work of other divisions of trade.
Part 2 Product
2.01 Sections - Sections shall have framing of heavy extruded aluminum. The bottom rail of all sections and the top rail of the top section shall have a heavy 3” reinforcing flange with a 90 degree lip to provide rigidity. End stiles shall have a foam insert between the panel and the stile to provide a weather tight seal. Panels shall be 6 ounce translucent fiberglass. Overall thickness of sections shall be 2”.
2.02 Track - 2” or 3” track shall be heavy gauge galvanized steel. A wedge type closing action will be accomplished with adjustable vertical track. Vertical track shall be attached to jambs with 12 gauge adjustable brackets or continuous angle. Horizontal track shall be reinforced with heavy galvanized steel angle. 3” track is optional.
2.03 Hardware - Shall be heavy gauge galvanized steel. Rollers shall have a continuous steel race encasing 10 (ten) hardened 1/4” diameter steel ball bearings. All hinges, brackets and
fixtures shall be attached securely to the stiles with special carriage bolts.
2.04 Struts - Struts are not standard nor supplied.
2.05 Counterbalance - Counterbalance shall be oil tempered and helical wound torsion springs engineered to comply with industry standard 10,000 cycles, extended cycle life
optional. (Reference ANSI/DASMA 102)
Part 3 Execution
3.01 Inspection - Inspect the surfaces that the door is to be attached to and assure that they are structurally sound and properly prepared to receive the door. Review all dimension sizes of the opening and the door to assure the specified design criteria has been met.
3.02 Installation - Install the doors in accordance with General American Door
Company instructions and standards. Installation will be by authorized General American Door Company representatives.
GADCO LIMITED WARRANTY
General American Door Company (GADCO) warrants to the original purchaser that each commercial sectional door will be free from defects in material and workmanship for a period of one year following the date of purchase, excepting normal wear and tear, abuse, misuse or accident. Labor charges for replacement not included.
FOR COMPLETE DETAILS, CONSULT AUTHORIZED DEALER.
Specifications subject to change without notice.
< Back To Commercial Garage Doors
|
